Aluminium Sliding Track Commercial Movable Sound Proof Partitions Walls for Banquet Hall
|Place of Origin:
|Series 65 mm sound proof partitions
Payment & Shipping Terms:
|Minimum Order Quantity:
|10 square meters
|121 / 135 dollar per square meter
|Carton package, MDF batten on four section sides ,foam board on both front face.
|Shipped in 10 days after payment, based on the quantity.
|D/A, D/P, L/C, T/T, Western Union, MoneyGram
|5000 square meters per month
sounproof folding partition,
movable sound proof partitions
Commercial Movable Sound Proof Partition Walls for Banquet Hall
Soundproof operable folding wall system is ideal for dividing and creating rooms.
The folding wall system can either be supported from the ceiling and is made up of wall panels that are connected by hinges and stored at the end of the track when opening the wall. There are sound insulation seals between the panels, ceiling and floor.
The operable wall structure is composed of aluminum profiles, sheets of treated particleboard or MDF and insulation. The combined structure forms a panel that has a total thickness of 85mm and depending on the insulation material ensures a soundproof resistance of 40-49dB (decibels).
When the operable folding wall system is supported at the ceiling it runs along an adjustable aluminum upper track that is equipped with bearings inside of carriages. This enables the walls height to be adjusted by 15 mm. The carriages are installed on every second wall panel and are located at the center of the panel. Because the wall hangs from the ceiling, it is important for the installation of the wall that the wall is attached to something solid (i.e. concrete ceiling, steel structure, wood beam etc.).
In the case that the folding wall is supported by the ground, an aluminum track is installed on the floor where the carriages move the wall and at the top there is a guiding track. The height is also adjustable by 15 mm.
At the end of the wall, a jamb profile is installed to close the last panel and which is also used as a door. This, together with the jamb is installed to start the wall and allows for the walls width to be adjusted 20 mm.
Every panel of the folding wall is equipped with a sunken stopper which is used to lock the wall, using a separate handle/knob, into an opening recessed into the floor. The openings in the floor are covered with templates which are supplied with the wall. The separate panels of the wall are joined with hinges.
The standard colour for the track profile of the folding wall and the jamb profiles is white and the panels edge profiles are natural anodized.
There is a wide variety of panel surface treatments.
As a special solution it is possible to install a glass opening in the center of the panel. The opening can cover the whole panel, the bottom or the top.
|Top hanging system without the need for a floor track.
|Each panel 600mm-1200mm.
|Aluminum Or Steel Track
|Roller on panel
|Single or Double Roller
|Heavy-duty steel-gusseted aluminum inner frames reinforced with full height.
|Top and bottom seals
|Top and bottom pressure retractable seals ensure effortless moved and locked.
|700mm - 1200mm maximum.
|Numerous panel stacking options for complete flexibility.
|MDF,Plywood, woven fabric, Leather,Natural wood veneer, Melamine,Wood moldings, etc.
|Satin anodized or polyester powder coating to all exposed aluminium components available in a wide range of colour as standard.
Hotel on the hanging rail activities partition products on the hotel hanging rails off the general framework of the aluminum frame material processing and production, internal partition expansion board, suitable for high-end hotel private rooms, banquet halls, conference rooms, showrooms, mufti-function Hall and so on. The sliding door base board is a MDF board or glass magnesium board. The decorative surface can be leather (cloth art) hard bag, soft bag, wallpaper, color steel veneer, hollow veneer and so on.
1. Before the renovation, the on-site measurement must be performed. According to the measurement data and the construction structure of the site, the design drawings shall be issued by the construction party, and the two parties shall confirm to enter the next step without any doubt.
2. Partition production is usually completed by a design company in its own factory. The installation engineering part is produced on site. Therefore, after confirming the design drawings, the requirements for glass thickness, materials, hardware accessories, and borders shall be analyzed and explained.