Melamine Surface Operable Sliding Doors / Folding Room Dividers for Hotel
|Place of Origin:||China,Guangzhou|
|Model Number:||Series 65 mm sliding partition walls|
Payment & Shipping Terms:
|Minimum Order Quantity:||10 square meters|
|Price:||105 /127 dollar per square meter|
|Packaging Details:||Carton package, MDF batten on four section sides ,foam board on both front face.|
|Delivery Time:||Shipped in 10 days after payment, based on the quantity.|
|Payment Terms:||D/A, D/P, L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||5000 square meters per month|
|Service:||OEM Service||Height:||4 M|
|Material:||MDF Board+Aluminium||Thickness:||65 Mm|
|Application:||Office,conference Room||Color:||Multi Color|
acoustic sliding partition,
sliding folding partition
Operable Doors Folding Room Divider Hotel Sliding Partition Walls
The operable wall series is the highest specification range of fully operable, individual-panel movable partitions system. Acoustic insulation of up to 56dB noise reduction is achieved with a combination of operable top and bottom seals, high performance multiple in fill's and a panel assembly design that allows an acoustic break between the frame and outer layer.
The vertical channels of each panel incorporate polymer inserts that facilitate an acoustic seal when the panels are set out as a wall. Panels are produced in three thickness, 65 mm, 85 mm and 100 mm, depending on acoustic rating (from 37dB–56dB).
|Panel suspension||Top hung only||Top hung only||Top hung only|
|Panel thickness||65 mm||85 mm||100 mm|
|Max height||4000 mm||6000 mm||18000 mm|
|Panel width||500-1200 mm||500-1200 mm||500-1200 mm|
|Face material||9 mm||9 mm||12 mm|
|Pass doors||Single door or Double door|
|Sound insulation||20-32dB Rw||28-36dB Rw||32-50dB Rw|
|Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. (Customized)|
1.It can be moved and reused repeatedly. The compartment system material will not bring waste to the environment. It is a kind of green building materials and has a long service life. In the long run, installing lalat high compartment system material is better than installing other forms. Partition materials are cheaper and more cost-effective.
2.During use, the positions of the doors, windows, physical modules, and glass partitions can be exchanged at any time, and can be reassembled and reused. After the materials are disassembled and assembled, the damage is minimal, and the expenses incurred by the frequent relocation of offices can be greatly reduced.
3.The internal structure can be easily cable laying. Without wall-embedding, the maintenance and replacement of cables is more convenient, and separation of strong and weak electricity is possible. The cable trough can act as a shield for signal lines.
5.Fireproof and fireproof. The compartment system is composed of metal structures. The materials such as glass and color steel plate also have fire resistance. The fire resistance of the compartment system materials can reach 30, 60 or 90 minutes.
6.No pollution odor emissions, can be used immediately after installation.
7.The door frame has a sealing strip, the door leaf is a trapezoidal edge, the door frame is a trapezoidal mouth, and the sound insulation effect and the sealing performance are improved.
8.The glass door lock can be installed in the middle, it is extremely easy to use.
9.Blinds can be installed inside, not easy to dirty, no cleaning.
10.The sound insulation effect is good, and the partition wall has a very good sound insulation effect.
11.Material selection, you can choose double glass plus blinds, you can also choose color steel plate, gypsum board, melamine board, fire board, cloth velvet and so on.
12.Colors for you to choose from, each material has a variety of colors, different color components can be used with. You can even specify or provide any color and texture finish material.
13.Construction voice is small. Does not affect the working life of people around them.
14.The effect of fashion, elegance, simplicity and refinement.
Track: The tracks are made from extruded 6063 - T5 anodized aluminium. The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections, and shall be reinforced overhead by drop rod brackets. Aluminum track housing shall include an integral nut slot to accept a hardened square nut for attaching each drop rod bracket to the top of the track.
Panels:The Panels will be made from 12mm MDF boards and shall be 100mm thick and 1230mm maximum width, made to the appropriate acoustic rating and structural backing and mounted in full perimeter extruded aluminium frames with interlocking corner construction .The panel faces shall be finished with selected material.
Panel Surface Finish:The panel surface will be as per the clients requirement finished either in Sliwal factory – China or by others . The normal finish such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom and as well as closure seals for the operable wall system.Retractable seal drop will be 23mm.